Tellerschleifer für 75 mm Schleifscheiben.
Gedruckt mit PETG, die Thermoscheibe mit ASA, die Füße mit Flex
Benötigt werden:
770 Motor ca. 5000-6000 rpm
Klett-Klebepad 75mm oder größer zum schneiden. Klettstreifen nebeneinader gehen auch
Schalter, eckig oder rund
12V Stecker
Schrauben:
2x M4 x 10 für den Motor
2x M3 x 8 für den Teller
6x M3 x 10 3x für Rückseite, 2x für die Platte, 1x für die Front oben
2x M3 x 14 für Front mit Sockel
6x Unterlegscheibe M3 2x für die Platte, 4x für die Füße
8 Muttern M3
10 x Spax ( oder ähnliche ) 2,5 x 12 4x für die Füße, 6x für Gehäuse/Sockel mit Grundplatte
Druckeinstellungen:
Das Gehäuse und der Sockel benötigen Stützen. Diese sind in den 3mf Dateien enthalten.
Ich habe alle PETG Teile mit 4 Perimeter und 50% Infill gedruckt. Die Füße mit 2 Perimeter und 5% Infill.
Disc sander for 75 mm sanding discs.
Printed with PETG, the thermal disc with ASA, the feet with Flex
Required:
770 engine approx. 5000-6000 rpm
Velcro adhesive pad 75mm or larger for cutting. Velcro strips next to each other also work
Switch, square or round
12V plug
Screws:
2x M4 x 10 for the motor
2x M3 x 8 for the plate
6x M3 x 10 3x for the back, 2x for the plate, 1x for the front at the top
2x M3 x 14 for front with base
6x M3 washers 2x for the plate, 4x for the feet
8 nuts M3
10x Spax (or similar) 2.5 x 12 4x for the feet, 6x for housing/base with base plate
Print settings:
The housing and base require supports. These are included in the 3mf files. I printed all PETG parts with 4 perimeters and 50% infill.
The feet with 2 perimeters and 5% infill.
The author marked this model as their own original creation.