Prototype version, fits the Sapphire R9 290X Tri-X OC with two Noctua NF-A12X15. I tried this setup out to reduce noise and improve temps, but the temps increased with 4 degrees Celsius, making the top GPU 94 degrees. Noise was reduced. I put the stock cooler back on the GPU, since it cools better. The brackets screw on the 4 screws that was previously holding the old yellow stock fan case.
Printed mine with 80% infill, holes are for references, drill with 1 or 2 mm drill bits for the stock screws to screw in. Flip the prints to the side to print, without support, without raft or brim.
The author marked this model as their own original creation.