18650 Enclosure for Heltec Wireless Paper Meshtastic Radio

Basic Meshtastic enclosure for the Wireless Paper LoRa board, 18650 battery, and a power switch.
24
109
0
1606
updated March 28, 2024

Description

PDF

A simple two-piece case for your Heltec Wireless Paper board, ideal for a Meshtastic radio.  

 

You will need some supports to print properly.  I strongly recommend manually tree supports on buildplate only.  You will need to support the tabs on the back piece for sure, and the cutouts for the tabs, USB, and switch are highly recommended unless your bridging is on point.  See the included pic.

 

In addition to the WP, you will need an 18650 battery and a small sliding switch like this: https://www.amazon.com/gp/product/B0799R529Z  Switch attaches with M2x4mm bolts.  Solder the WP battery connector to the battery and switch as per the pic.  Assembly should be self-explanatory.

 

Possibly necessary legalese: Meshtastic® is a registered trademark of Meshtastic LLC.

Tags



Model origin

The author marked this model as their own original creation.

License