PiCubed - a raspberry pi case design

I wanted a challenge for my first ever cad design project, so I decided to design around a Raspberry pi 5 with the active cooler. I learned a lot during this process, and had a lot of fun too. 


Outside of the filament, you will need:

• 6 self tapping M2.5x6mm screws
  • 2 - to secure the power button and bracket to the linear slide
  • 4 - to secure the rbpi to the case
• 6 neodymium magnets - 2mm thick, by 5mm diameter
  • glue one into each of the pockets
    
     

I hope you like it. Of course, as it is my first big design project, any feedback would be quite helpful.