Rapidstrike Trigger

I recently modified a Rapidstrike and rewired everything. I used the switch plate from ahalekelly, which is imho the best way to make rewiring smooth and easy. BUT, there's one thing I always wanted to change… the trigger he provided is looking a lot like the original (which is not bad, but I wanted a different look. I decided to make it a lot slimmer and when I tested it, I saw another problem. The top is touching the wires on S3 com, which can cause either the wires to get damaged or block the trigger, which is both bad… so I made to top way smaller and I also changed the backside to only touch the lower part of the S1 Trigger, so It doesn't interfere with anything else.

You can easily print this trigger upside down, I printed it without any support. 

slim design, top and back are modified to prevent damage on the wires and to make trigger activation smoother.