15 Degree Tilting WaveShare 5 Inch DSI Screen Mount For Voron 2.4

BOM:

Waveshare 5" DSI screen
2 x M2 self-tapping screws
2 x M3*12 BHCS or SHCS
2 x Heatset Insers (M3x5x4)

Print the 3 parts and assemble according to the images. The parts are all in the proper orientation for printing.

If printing the faceplate in ABS or ASA, I recommend printing it with shrinkage set to 100% to make sure it fits snug.

You'll want to really tighten the M3x12 screws to make sure the screen doesn't tilt down when touching it.

Modified for the 5" Waveshare screen

Faceplate modified from https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount