Solis 117 Tray

This is a tray for a Solis 117 coffee maker that is slightly leaking water.

The tray doesn't interfere with the operation of the machine.

Instructions:

Built plate 2 has a pause after the prime line. Remove the prime line and press continue.

1. Glue the two pieces together. I recommend scratching the connecting surface with a sharp knife to help the glue stick.
    
2. Sand the inner surface with sandpaper (120 grit for example) to help the resin stick and clean it well. We don't want it smooth.
    
3. Coat the inside with epoxy or acrylic resin to make it 100% watertight.

I used ABS, PETG should also work well. Just make sure your glue is compatible with the chosen material.

The picture is before coating it with resin.