Big Ben - Hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
4
24
0
167
updated March 25, 2024
Description
PDFPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Elegoo Black Transmission Distance: 0.3
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Yellow Transmission Distance: 10
PLA overture White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Red
At layer #21 (1.76mm) swap to Yellow
At layer #26 (2.16mm) swap to White for the rest.
Model origin
The author marked this model as their own original creation.
