Weather station for thermal sensor

For my domotic use, I was seeking how to preserve the external probe from the rude weather. 

Oregon Scientific sensors are very difficult to find anymore. 

So, I've designed this weather station. You can adapt the inner part for different type of sensor (with some Fusion360 skills). 

No glue, no screw, just clips. All parts are difficult to assembly (on purpose) except the top one, in order to be able to change de batteries. If your prints are too loose, add glue. If your prints is too tighten, use some sand paper to adapt the connectors. 

All parts should be printed upside down (except the sensor stand). I have added modificators with PrusaSlicer for a better infill (80% density). 

You might need supports for the sensor stand ("support sonde" in french) and for the bottom cup ("coupelle basse" in french).