MKS TS35 Front Panel for Voron Trident

A front mount for MKS TS35 screen for the Voron Trident machine. It was designed as drop in replacement of Mini 12864 holder and has only one single printed part.
 

The MKS TS35 is larger than the Mini 12864 one, so the panel is 4mm taller and slightly sloped. This should not be a problem neither for bottom panel sheet nor for doors.

There are two versions: 
 

1. a 117 mm width which is default Voron Trident size 
    
2. a 122 mm width which help me to reduce gaps between front panel components. 
    

Please choose whichever option suits you best.
 

The part should be printed with Voron recommended settings. Before installing the display, please remove two small supports near the bottom clip and check the size of the window cut (the display has a fairly tight fit). The display is secured with two M3 bolts/nut of suitable length (e.g. M3x8).