HSW Printer Wipes Holder

I love the Honeycomb Storage Wall by @RostaP enough to now have a 30-panel wall in my workroom - covering 108cm x 111cm (nearly 4 feet x 4 feet)!  All of the outer panels have a solid frame thanks to the fabulous Honeycomb storage wall with borders remix by @Waldmops_249902!

Naturally, some of my favorite accessories couldn't be suitably held by any of the HSW remixes that I found on Printables, so I got to work in ViaCad Pro...

I clean my 3D printer bed's PEI sheets with 91% isopropyl alcohol and "AAWipes Delicate Task Wipers" that I purchased on Amazon at https://www.amazon.com/gp/product/B07YF8TC7F

I couldn't find any HSW holder for these wipes on Printables, so now we have one.

This HSW Printer Wipes Holder has two M3 holes for attachment to the honeycomb storage wall with the @RostaP insert-with-M3.stl insert.  The internal dimensions of this wipes holder are 154mm wide by 32mm deep by 154mm high.

The provided STL file can be printed in PLA or PETG and does not require supports.

A PrusaSlicer 3MF file is provided for generic PLA.

A g-code file has been provided for the Original Prusa MK4 using Input Shaper at 0.2mm SPEED layer height.

The HSW Printer Wipes Holder seen in the photos was printed on an Original Prusa MK4 with Sunlu White/Blue Glow-in-the-dark PLA using Input Shaper with a 0.4mm nozzle at 0.2mm SPEED layer height with a 15% grid infill.

Note that this HSW Printer Wipes Holder is designed for the honeycomb storage wall, but it could be attached to any wall using two small screws!

Be sure to check out my other designs - including more honeycomb storage wall (HSW) accessories, universal key covers, and a diverse collection of household accessories and 3D printing tools - on Printables at https://www.printables.com/@PhilCaruso_661446/models

Designed a printer wipes holder for attachment to Honeycomb Storage Wall by @RostaP