Kitcat " Filament painting"

🖼 Kitcat   ..   "Filament Painting"

👀Preview:

🔧 Printing Settings:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Please do not change Z size! It will damage model. You can scale a little bit X and Y but let me know if you need other size.

🎨 Materials:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA 3Dpower Grey Transmission Distance: 2.7
PLA 3Dpower Light Grey Transmission Distance: 0.4
PLA Jamghe White Transmission Distance: 5.2

🔄 Filament Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Grey
At layer #14 (1.2mm) swap to Light Grey
At layer #15 (1.28mm) swap to White for the rest.

💖 Support & Sharing:
Your support fuels us! If you like this model, don't forget to rate and share it with the community. 
Your feedback and creations are invaluable to us. 👍💖!

Enjoy :-)