CAPSULE MARKFROST

A table lamp based on the IKEA MARKFROST base, which takes on a whole new dimension thanks to the 3D printed shade. A simple and functional design to make your home more comfortable.

Works with IKEA MARKFROST: https://www.ikea.com/us/en/p/markfrost-table-lamp-marble-black-00462675/ table lamp base.

Fancy to print & sell this design commercially? You can subscribe to my commercial catalogue at: https://designs.cubee3d.com/martin-zampach-lampshades

3D PRINTING SETTINGS

It is easy to print, and there are two options: One without support and one which requires only a minimum of it.

OPTION 1 - WITHOUT SUPPORT:
0.4mm layer height
+ adaptive layer height from 0.15 to 0.4
0.55 mm line width
no support required
Print time 3:22 min. on BAMBU LAB SLICER

OPTION 2 - WITH SUPPORT:
0.2mm layer height
0.55 mm line width
30° support threshold
support type tree
Print time 4:02 min. on BAMBU LAB SLICER

SIZE:

148 x148 x 180 mm
Wall and rib thickness 1.0 mm

Lamp shades were printed on BAMBU LAB P1S printer and updated profile their slicing sw. All printing information is based on that. Printing time on other machines may vary.