Firemare "Filament Painting"

🖼 Firemare  ..   "Filament Painting"

👀Preview:

🔧 Printing Settings:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

🎨 Materials:
PLA JakobFIlament Black Transmission Distance: 0.3
PLA 3Dpower Red Transmission Distance: 5
PLA 3Dpower Grey Transmission Distance: 2.7
PLA Aurapol Orange Transmission Distance: 4.4
PLA 3Dpower Light Grey Transmission Distance: 0.4
PLA Jamghe Yellow Transmission Distance: 2.8
PLA Jamghe White Transmission Distance: 5.2

🔄 Filament Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #11 (0.96mm) swap to Grey
At layer #13 (1.12mm) swap to Orange
At layer #17 (1.44mm) swap to Light Grey
At layer #18 (1.52mm) swap to Yellow
At layer #21 (1.76mm) swap to White for the rest.

💖 Support & Sharing:
Your support fuels us! If you like this model, don't forget to rate and share it with the community. 
Your feedback and creations are invaluable to us. 👍💖!

Enjoy :-)