Music Note Polymer Clay Cutters

Polymer clay cutter series: Music notes!

Make sure to use cornstarch with these cutters. They are tiny, and clay can easily get stuck in them.

These cutters have a sharp, thin cutting edge and can be fragile. Choose a sturdy filament (PLA is best) to avoid warping and breakage when you press on them. I always print my cutters at .15mm layer height, so your mileage may vary with other heights. 

I don't recommend sizing these down, as they are already quite small, but feel free to size them up! They work best with thinner clay, but I have had success with clay up to 4.8mm thick.