Lily of the valey Maiglöckchen Flower

This is a 3d print with a little bit of a crafty energy. To achive the natural shape of plants, whitch is not straight and more organic, I used a heatgun to bend the plant stems and the leafs. I recomend PLA for this procedure, because of it's low melting point. If you don't own a heatgun, maybe a hairdryer will suffices. Do not overheat your material, and bend the stem and leafs with your fingers. Take care not to burn your model or your hands :). After this, you can assemble the blossoms. They mostly stay in place, but to secure them I used glue. If a hole is to small for the branches, you can trim them with scissors.