X-Shot Micro Plunger Pull

Thought it would be fun to be able to have any color for the plunger pull on the X-Shot Micro foam dart blaster. This part requires the metal pin that comes with the Micro. Simply push the pin out with a tiny screwdriver (or a paper clip), and replace the stock pull with this printed part and re-insert the pin to secure it in place. 

I would recommend 3 perimeters and ~15% or more infill. No need for a brim, raft, or any support. 

The holes are big enough for the pin to pass through easily. The securing of the pin happens in the plunger's pin hole, but if yours is a bit worn out, you may want to print at 95% to tighten up the pull's holes. This likely won't be necessary, however.