Ender CR10S Pro v2 Bed Levelling Lock

Ender CR10S PRO V2 Bed levelling locks that assist in locking the bed levelling for the CR10,

Printed form ABS due to the position in relation to the print bed (dont think PLA would of lasted with proximity to the heat pad or the thermal transfer from the bed screws)

Printed with a 20% infill and with narrow thin tree supports with raft mode enabled, can be printed with PETG using brim mode.

Would recommend printing with teeth/notches facing up, as you'd want that as smooth as possible.

Used a 0.20 layer height but id probably would suggest a 0.16 for the teeth/notches detail.

Printed Karlo's version for our ender 3 S1, but couldn't find a model for our CR10S Pro V2,

Decided to completely re-draw from the ground up a similar design as per Karlo's version that now matches the base plate of the CR10 (different radius corner compared to the Ender 3 S1) and tweaked the feet so it grabs significantly more per turn onto the wheel compared to Karlo's design in comparison to the S1 version. Also increased tolerances so there's a distinctive point where the user can feel when the teeth/lock has latched onto the slots of the wheel.