Happy with your Prusa printer? Earn $30 when you recommend us to your friend, family or shop with the updated Prusa Rewards Program. PS: They will get an extra Prusament spool!
3D Models 3D PrintersVoron Parts & Upgrades

Voron 2.4 Cable Chain Anchor - 3 Hole - 19mm Higher

0 reviews
Modified cable chain anchor for Stealthburner for Voron 2.4.
14
76
0
795
updated March 22, 2024

Description

PDF

I built my Voron 2.4 very close to specification, but at closer inspection I found that I installed the cable chains the wrong way round (yes, this is possible). This makes the cable chain kink at the top connection and allows the cable chain to create a much more open curve. I wanted to remove this kink and I changed the cable chain around. This resulted in a tight bend on the cable chain as per design. This was too tight for my liking.

With this model I tried to solve this issue.

Model origin

The author remixed this model.

https://github.com/VoronDesign/Voron-Stealthburner/tree/main/STLs/Clockwork2
github.com

Differences of the remix compared to the original

The original cable chain anchor is fairly low and creates tight bending of the wires inside the cable chain. This model is 19mm higher.

License