Mount for the Beacon probe to the TRONXY X5SA hotend

I wanted to experiment with the Beacon probe on an unmodified TRONXY printer. This mount is made to just replace the original blue/black inductive probe. 

The mount should fit both the standard and the slim version of the RevD and clones and might also fit the 90-degree angle version. Not tested with the RevH version.

Two versions are provided, one uses hex nuts, the other uses heat set inserts.

To install you need two 6mm M3 bolts to attach the mount to the print head and two M3x4x5 heat set inserts or M3 nuts and 6mm M3 bolts to attach the probe to the mount.