Dodge Neon Shifter Bushings

Printed with PLA+ and would probably recommend TPU for a little flex to make installation easier.

Used a slight amount of heat where the inside squeezes in to make installing over the pin recess easier.

1995-2005 base neons need 3 small and 1 large bushings.

2003-2005 SRT-4 needs 4 small bushings.

The fit is tight and might require slight sanding depending on the condition of your cables.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.2mm

Infill:

Filament: eSun PLA+ Black Post-Printing