Elegoo Neptune 4/Pro/Max/Plus Fan Shroud V5 with Beacon/Cartographer mount.
V5 of Orzorzorz's/HalfManBear's Fanshroud for the Neptune 4 with an integrated Beacon/Cartographer mount.
81
409
1
5442
updated
April 4, 2024
Description
PDFOffset values should be set to:
Max and Plus
x_offset: 0.
y_offset: 19.
Pro and Non-Pro
x_offset: 0.
y_offset: 22.
Please use calipers to Measure and confirm these values at time of installation, the cad says they should be correct but may not be 100% accurate
Note: Due to Clearance Issues with the Z Uprights “Low Profile” configurations of the Cartographer and Beacon rev D are not recommended, “Standard” and “90 Degree” configurations Should have no issues if properly cable managed.
| With Aux Fan | Without Aux Fan | |
| Low Profile | NOPE | A VERY TIGHT FIT |
| Standard | A TIGHT FIT* | HAS ROOM |
| Right Angle | HAS ROOM | ROOM TO SPARE |
Recommend that the Aux Fan simply be removed as the ample cooling potential from the 2x 5015's make it redundant.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
edited to add an integrated mount for a beacon or Cartographer eddy current sensor.