AnyCubic Kobra 2 Pro/Plus/Max spool holder, modified

This will fit the Anycubic Kobra 2 Pro/Plus/Max.

I suggest organic supports on the spindle  with the small end on the base.  large brim to keep from coming loose while printing.  Also, a modified lock nut, to lock the inner nut in place.  It has a tendency to tighten up if not locked.

Made the spindle much longer and modified the nut with a large brim to allow for larger spool holes and centering of the spool.  Also includes a locknut.  Depending on how place your spool, the friction will cause the centering piece to tighten up on the spool.  The locknut prevents this.