A Multipurpose Tripod Stand

A tripod stand holder for soldering, mobile phone magnifier when soldering, or digital distance meter, holder for laser et cetera

or … maybe a way to document your work by attaching a mobile phone/camera and take pictures along the way…

28 mars added stop nuts with wings, see under Accessories

also added 3MF_SwitchPlates and STL_SwitchPlates, Manfrotto and Velbon

Note that the screw to the knob to the switchplates is M4 round head (as the other M4). Don't tighten too much … you will notice …

31 mars added JointConnectionFixed for fixed angle in 15 degrees step, see under Accessories (and see images below)

Quite a few parts

First of all

you need this hardware

4 screws and nuts M6 x 40 (hexagonal head for the screw)

3 screws and nuts M4 x 25 (round head for the screw and 19 mm should be enough)

For the soldering item/phone stand I've cut 1 cm of a silicone hose (diameter 12mm outer, 8 mm inner) for each hook ( a common beer-maker hose :-))

Glue if neccessary (the phone stand)

Leg

Body and Phoneholder

SwitchPlate

JointConnectionFixed 

Other photos

Feel free

https://www.paypal.com/paypalme/gillislindstrom