Venom - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Control3d Black 
PLA Ziro Dark  Grey 
PLA Sunlu Meta Grey 
PLA+ Esun Bone White 
PLA Control3d White

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Dark  Grey
At layer #15 (1.28mm) swap to Grey
At layer #20 (1.68mm) swap to Bone White
At layer #24 (2mm) swap to White for the rest.