Toyota Corolla 2003 Key repair
After some buttons printed I realized that the two are glued to a flexible layer so, I did the same using TPU
3
51
0
572
updated
March 20, 2024
Description
PDFYou can print it all using some FLEX/TPU filament at 0.2 but I did a version using FLEX for base and PET for the buttons. Doing a extruder change on layer at 1.00 mm and with 0.1 layers.
If the base is too thick you can feel too hard to press the buttons so maybe you will require to reduce it's Z from 0.3 to 0.2
Tags
Model origin
The author marked this model as their own original creation.
