Sword Stand (Sheath Compatible)

I took inspiration from the sleek shape of the original and I tried to add on it to accomodate a sword with a sheath.

The gap for the sheath is 20 mm.

The model can be scaled accordingly to accomodate different sheath sizes.
 

There are two models available:

• Standard: Can be printed with your preferred settings, needs infill to support itself.
• Hollow: The hollow model has been hollowed on the inside to strenghten the walls and prints with no infill: I printed it with 3 layer walls at 0.6 diameter nozzle, a 2 layer wall should be plenty strong too. This model has an internal pillar support to help it print correctly and better distribute the sword weight.

This is a complete remodel of the original.
Check out Pjotr original model.
I took inspiration from the sleek shape and I tried to add on it to accomodate a sword with a sheath.