Witch Support Free Remix

This is a support-free FDM friendly remix of the model Witch by gloomyKid. 

Original Model: https://www.thingiverse.com/thing:4080268

No supports are required anywhere in this remix and it can be printed very easily. Check out the 3D print timelapse to see it in action.

Follow me for more cool, support-free 3d printing timelapses on:

YouTube: www.youtube.com/robin3dverse
Instagram: @robin3dverse

Print and share your prints on Instagram!
You can credit my remix via @robin3dverse and tag me!

3D PRINTING SETTINGS

Timelapse: https://youtu.be/lQGwJdc6jLk

Slicer: Cura 4.9.0
Layer Height: 0.2 mm
Wall Line Count: 3
Infill: 6%, Gyroid
Print Speed: 40 mm/sec
Z-Hop: 0.3 mm
Z-Seam: Back-Left
Supports: No
Raft/Brim: No

Print Time: 5 hrs 42 min
Dimension: 192.41mm x 47.18mm x 90mm
Weight: 30 grams