RSEAT P1 SimRig / Sinuslive Bass Pump III Holder

RSEAT P1 SimRig / Sinuslive Bass Pump III Holder

Note my other models for RSEAT P1!

You will need the following per holder / speaker:

6 x M4 4x6 embedded screw nut
3 x M4 x 12mm screw for the speaker
3 x M4 x 16+ mm screw for Part A and Part B to be screwed together

I printed the parts with:

0.2mm layer heights (Bambu Lab X1 Standard Profile@BBL X1C)
5 / 5 top and bottom layers
3 walls
and 25% infill
with regular PLA

The model is available for free download and use.
If you still want to invite me for a coffee for my effort, troubles and time (I ran out of filaments a couple of times), you can do it via:

https://paypal.me/mikloskiszely