Customizable Medal Holder

4/28/24: Added the design with the wrestling figures on top

If you would like a custom design with characters on it please message me directly, so I can customize it to your liking. 

I created a 2-piece medal holder/display that allows it to be printed on mk3 size printers. The total width is 12 inches when assembled.

This item is easily customizable. I added a name and silhouette characters to the top of mine. 

Revision 2 of this model I found to be the easiest to print with the front/visual side of the holder face down. Revision 2 also has thicker left and right-side walls. I have a slightly rounder model with countersunk holes if you like that better.

I printed it in overture PETG black. 50% infill and 3 perimeters were my preferred settings. Depending on how well the supports detach the pegs for attaching two pieces may require some sanding. It will be a tight fit. 

 You will need supports for the pegs that attach the right side to the left side. I have the full medal holder in 1 piece attached if someone has the ability to print the full part. 

Please let me know if you have any suggestions to improve my models.