Clesana C1 SOG adapter

This set consists of two adapters to connect an existing SOG fan to a Clesana C1 toilet.
The intake connection is fed through the toilet housing at liner height as shown in the picture. 
A hole must be drilled in the center for this purpose. Please allow enough space for the toilet seat to lock in place. 
The air distributor for the intake manifold is simply glued on with superglue.
The wall duct can be installed either on the floor or in the rear wall.
All connections are designed for a 20 mm hose.

The elbow is used to connect the hose to the intake connection