Skadis bracket for Powerfix Caliper with case

I designed this bracket for my Powerfix caliper case (I like to keep calipers inside their cases).

The hooks are a little bit loose, but I found that less frustating that being to thick for skadis holes…

I printed mine in PETG but ABS or PLA is also valid.

For printing, turn left and right brackets so the 45º cut lays on the printbed. With this orientation, no supports are needed (all overhangs are 45º)

Happy printing!!!!!!

PD: designed in Onshape.

https://cad.onshape.com/documents/fe31cd80e2239771df5394a8/w/2c3