Poop Chute Bucket for Bambu P1 & X1 Series

This Poop Chute has been designed to capture the waste from the Bambu Labs P1 and X1 series printers. It is a remix from Fantasy3DPrintsShop

This remix has a number of updates from the original version, these are all fully detailed below. But in summary, it prints faster and with less material. But should be stronger and work better due to subtle changes in the overall shape. It now accommodates optional magnets, to securely attach to the printer. Use a drop of CA Glue to hold magnets.

• Nozzle: 0.4mm
• Layer Height: 0.2mm
• Infill: 10%
• Supports: None
• Brim: None

This was printed on my Bambu Labs P1S printer with Bambu PLA using the default setting of 0.20mm Standard. It used 313g of material and took 6h31m.

• Modified to accept 10x3mm Magnets 
  • I used and would recommend these magnets 
  • The design works just as well without the magnets. If you do use them, use a little CA glue to secure into place
• While the shape is similar to the original design, it has many subtle differences. The differences result in
  • Uses approx. 75g less filament
  • New shape prints 1hr 41min faster with the same print settings
  • Reduced overall footprint and height (the storage volume is still very similar)
  • Changed shape of top lip to improve access and looks
  • Added internal radius's to improve access and ease of emptying
  • Bambu logo is positioned differently