IKEA Milsbo shelf holders

The IKEA "MILSBO" display cabinet is a popular solution for displaying plants and treasured objects. I use mine for my LEGO collection!

These STLs are replacement parts for the shelf brackets which hold up the shelves in the MILSBO cabinet.  (IKEA part no.s 10003221; 10003241). I have measured and re-modelled these by hand in Fusion 360. 

10003221 is the centre mount that goes in the middle of the cabinet at the back of the shelf.

10003241 is the corner piece: 4 of these will hold up a full shelf.

I found that I wanted to mount additional shelves into my cabinet at an offset height from the existing mounting holes. IKEA don't provide any way of doing this, so I have modelled “tall” brackets which extend the mounting height by 55mm, approx. 50% of the way to the next hole.

For extra shelves, I bought some laser-cut acrylic half-width shelves from a seller on Etsy. If you have access to a laser cutter (alas, I don't any more!) these would be pretty easy to model and cut oneself.

Models

Original brackets: 10003221.stl & 10003241.stl

Tall variants with 55mm offset: 10003221-tall.stl & 10003241-tall.stl