Service Key for Perlator (24mm & 28mm)

Always had issues with removing the perlators from the tap to clean them. In the past just used a wrench, but always damaged and scratched them. So I finally decided to design a tool for it and print it. Hope you find it usefull.

Print settings:

• 0.6mm or 0.4mm Nozzle 
• PLA or PETG for greater strenght
• 0.25 layer height
• 20-30% Infill
• 3 Perimeters
• No support needed

You can print the markins “24mm/28mm” in a different color if you have a multi material printer. I just painted them black for better visuals.