VKB Gladiator NXT 8040 Profile mount

This is a simple mount for the Gladiator NXT to attach it to 8040 profiles as used in Simrigs or table mounts. It substitutes the original baseplate. If used in connection with my side covers this can reduce the width of the base to make it more suitable for a center mount.

I recommend using the following hardware:

4x M3x10 socket head screws

4x M6x12 socket head screws

4x M6 T-slot nuts

I recommend printing it lying flat on the bed with support only for the part meant to fit into the slot in the extrusion.