Drawer Slide Rear Mounted Bracket (Lontan)

These are designed in place of the expensive rear-mounted brackets for Lontan soft-close cabinet drawer sliders (they're a popular Amazon brand). I've added the Fusion 360 file if you'd like to adjust for your particular brand. 

They're designed to perfectly hold the top and bottom of the slides without them falling out, but allow the drawer sliders to adjust in and out to the correct depth of the cabinet. I've used them while adding soft-close drawers to my kitchen cabinets and they've worked great!

Drawer sliders:

https://www.amazon.com/dp/B0B82GMKMX?psc=1

Brackets this model replaces:

https://www.amazon.com/dp/B07KK7PNMK?th=1

Bracket dimensions:

• Gap for slider height (top to bottom once mounted): 45.75mm
• Gap for slider width (left to right once mounted): 11.5mm, but it has a notch to hold the slider in place, 6.9mm before the notch
• Total bracket depth from the cabinet back: 94mm

Print details:

• Printed in PETG for strength (PLA would probably work too)
• Orient with the holes against the build plate to avoid supports
• 0.2mm layers (MK4 “structural” settings)
• 3 perimeters
• 15% infill