Millennium Blades Trays

I didn't feel like gluing the trays together and if printed vertically, no supports should be needed, so I "glued" the parts together in solid works and print them vertically.

I wasn't able to remove small gaps where sections meet, but it didn't affect printing or structural integrity.

I also suggest buying a label maker off amazon. this works better then sharpie or felt tip pen.

NOTE this is only a remix for the trays, you will need the rest of files from the original project for things like Money holders, player trays, etc.

Print Settings

Printer Brand:

Creality

Printer:

Resolution:

6mm

Infill:

Filament: Various PLA Various

Notes:

6 card tray sliced vertically, used brim for added support and to deal with any lifting issues.

6 card tray printed vertically, used brim for added support and to deal with any lifting issues. I printed this a little too quickly (60mm/s), a little sandpaper will fix it.*NOTE* Brim still attached

I made the card trays print all in place, so they didn't require any glue or supports.