Power brick / wall wart cord wrap

Takes some adjustments to fit properly. This one I printed at 103% and still needed to grind the channels a bit. In general it is a good design though

Would like it more if I didn’t need to mess with the scaling, does the job though

Best design IMO. Yes a little longer print with more filament but the frustration saved is immeasurable. Some may need to scale 1% or do some file/sanding for the plug insert but a small price for what you get. Thicker cords(dremel,tools) print 30-35% infill. let it cool with the bed for best results(all quick pulls broke while cooldowns remain uneffected)

Very useful. Print slightly scaled up.

This is one of the most useful item that I have printed so far.

Works great

Works good, but for plugs with two evenly sized prong (like this Canakit one) I needed to use a knife to cut away a bit to make it fit. Very nice for organizing my too many plugs. Thank you for the model.

Printed with Prusament PLA. I will need to tweak the model size to make it fit. As the default size doesn't work.

Very handy!

The first few of these that I printed were really tight -- like, too tight to be usable. I found that scaling up to 103% and enabling "external perimeters first" made these perfect! Must be a setting in my slicer, though, since no one else is having this problem.

Regardless, these are fantastic! (edited)

I love these! Thank you!