Stronger DIN Rail Adapter for Meanwell RS-25-5

Improved the strength of the tab. 
 

In the comparison photos (with two parts side by side),  the part on the left is this model while the one on the right is the original design I modified from. 

Printed in eSUN Fire Engine Red PETG with 0.2 mm layers and 50% infill. No supports were required. Recommend ensuring the spring can move freely before applying force parallel to the printed layers of the tab. 

The tab of the remixed model had a small cross section at its thinnest point and broke off not long after I mounted it to the DIN rail. This model increases the strength of the tab by increasing its depth by 2mm. During testing of my slightly modified design, the tab was stronger and the spring still had sufficient clearance to expand for mounting the adapter to the DIN rail.