Hockey Stick Wall Mounts

These components mount to a wall and are used to help hold hockey sticks from tipping over. The sticks will sit loosely within the mounts once they pass through the bumps on each upstanding leg. The bumps will help hold sticks to the wall and will accommodate various thicknesses and widths of hockey sticks. 

The design has generous fillets to strengthen the upstanding leg as well as allowing the design to be printed without supports and have the parts printed normal to the large base (do not print with the large base against the build plate).

There are 3 files: Hockey_stick_holder.stl can be printed and used multiple times for the number of sticks you need. If you want to not have a recess or protruding tab on the ends, you can also print the "end" pieces. Attachment is via a #6 flat head countersink screw .

Some narrow youth sticks may require you to scale the model down within your slicer software.