EcoFlow Delta Pro Remote Wall Mount (EFDPRWM)

Anyone who has their Ecoflow DP at the back of the garage, for example, or has set it up in such a way that they are dependent on the remote control, will perhaps be pleased with this simple but functional wall bracket.

There are enough holes to fix it to the surface.

I would print the bracket flat on the bed. Use tree structure supports on the printing plate only. Works with 0.4mm nozzle as well as with 0.6mm. I used ASA as the filament. But it should work with any other filament too.

V2 - April 24: a few minor adjustments for better access to the connection socket