RGB Raspberry Pi Moogle Console

This is still a bit of a WIP but I don't really have any desire to work on it any more so I'm going to post what I have in case somehow anyone wants to make one.

What is this??

A remixed raspberry pi case (based on the incredible design by Jamie brindle - https://www.thingiverse.com/thing:5158664) with a Final Fantasy Moogle theme to house a Raspberry Pi 4 running an RGB-Pi cable and using OS4.

This build is primarily made to be a video game console for Sony PVM's and other broadcast monitors that utilize RGB analog inputs.

The Parts:

Most of the parts can be found in the original build but the main ones I used in this were:

1. Raspberry Pi 4
2. RGB-Pi Cable
   https://www.rgb-pi.com/
3. Female RGB to BNC
   https://www.ebay.com/itm/392935885758
4. Raspberry Pi Argon One case
   https://www.amazon.com/Argon-Raspberry-Aluminum-Heatsink-Supports/dp/B07WP8WC3V
5. Small USB hub
   https://www.amazon.com/gp/product/B01N8VSKLY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
6. Noctua NF-A4x10 5V PWM
   https://www.amazon.com/gp/product/B07DXS86G7/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
7. Misc screws
8. x8 6x2 magnets for the lid and base
9. 4 rubber furniture bumpers for feet
    

The Build:

I designed this specifically for my Bambu with AMS so it's tailored for multi-color printing. 

The 3MF file has each part laid out on the plates and already color coded (Bambu studio specifically).

The main build steps can be followed via the original listing on thingiverse - https://www.thingiverse.com/thing:5158664

The main differences for the Moogle case:

1. I added some little pegs for the RGB to BNC board (I just drilled holes and used two small screws to mount it). 
2. There are 8 holes for the magnets for the lid and base
3. The two arms use 2 M3x8 screws to mount

The OS install info can be found here - https://www.mortaca.com/rgb-pi/wiki/index.php?title=OS4_Installation

Top shell is redesigned