Duckbill Paddle for Miniature Toggle Switches

A simple ‘duckbill’ style paddle designed for most kinds of miniature toggle switch with a 3mm diameter, >10mm length.

Printing Guidelines

• Layer height: 0.1mm
  Supports: No
  Brim: No
  Walls: 2+
  Infill: Any
   
• Depending on your printer and filament, it will either be a snug friction fit or a slightly loose fit. If it's too loose, dab a small amount of glue in the hole before fitting the paddle (blu-tack also works as a removable solution)