FGC-6: Sound Amplifier for 14mm CCW for airsoft

this is modeled so it can be threaded on the 14mm CCW barrels tips of airsoft replicas and the FGC-6 14mm CCW outer barrels.

there is the normal version and a FGC6 version this will give a bit more sport by sliding a bit over the barrel. this might help to prevent the threads from breaking off.

and as you can see are there 3 models out there what will give the best sound effect? I leave that up to you to explore/

print settings:
0.2 layer hight should be fine.
you can use the 8 layer walls and a 40% infill.