Akro-Mils 20701 Bin

Akro-Mils 20701 Bin: Fits in 10726, 10164, and 10144 units. 

One of mine got stepped on and broken, so I came up with this 'lil guy. 

This model is designed to be used with vase mode and should be a drop-in replacement except that they aren't compatible with the "Akro-Mils" dividers. The should even stack into one another like OEM as long as you use a Line Width of 1.2mm or less. I have included dividers to be used with the printed versions. 

I used the following settings: 

Spiralize Outer Contour

Nozzle: 0.6mm

Layer Height: 0.4mm

Line Width: 1.2mm

Infill Line Width: 0.8mm

Top/Bottom Line Width: 0.8mm 

I used Translucent PLA, but I feel like PETG would be a better material choice. We'll see how long these last. 

Two versions are available: 

• V1 is a cleaner look and has the handle facing up for ease of printing. It is not advised to install V1 in the top row of the storage unit, it will be a challenge to remove. 
• V2 functions more like the OEM Bin, with the handle facing down so you can grab it from the top row of the organizer. 

The divider works with OE bins as well as this printed version.