Fairphone 5 Case

I was inspired by the other fairphone 5 case models here. Especically https://www.printables.com/model/731965-best-fairphone-5-case-standard and https://www.printables.com/model/588836-fairphone-5-cases

But I wanted it a little bit different, so I designed my own.

The back side is ~1mm higher than the camera bump and the front side has a bump of 1.4mm.

The cutout for the cameras is quite snug and I put a hole where the slogan of the fairphone is.

I printed it in white DasFilament TPU V2.