Ender 5 Pro Nozzel Clean brush

Modification required before activating nozzle cleaning

https://www.thingiverse.com/thing:4410969

That is the part of the code that needs to be replaced

G92 E0
G1 X2.0 Y140 E10 F1500 ; prime the nozzle
G1 X2.3 Y140 F5000
G92 E0
G1 X2.3 Y10 E10 F1200 ; prime the nozzle
G92 E0

Replace the original code with this code

; Return to prime position, Prime line routine
G92 E0 ; Reset Extruder
G1 Z3 F3000 ; move z up little to prevent scratching of surface
G1 X10 Y.5 Z0.25 F5000.0 ; Move to start position
G1 X100 Y.5 Z0.25 F1500.0 E10 ; Draw the first line
G1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little
G1 X10 Y.2 Z0.25 F1500.0 E10 ; Draw the second line
G92 E0 ; Reset Extruder

https://a.aliexpress.com/_ExqBXT7