Injection Travel Kit

Overview

This is a travel case for injection kits, primarily people on injectable hormone replacement therapy. The rugged parametric box has had an insert tray added with labeled spaces for the following:

• syringes
• vial
• draw-up needles
• injection needles
• cleaning wipes
• bandages

The box is fairly straightforward to adjust with a pair of user variables for updating the size of vial. I have included photos from Fusion 360 of how to adjust the parameters when the model is loaded

Bill of Materials

• 6x M3x30mm screws

Usage

In the root is the current, all-in-one model version. This is suited to adding stickers and general purpose use. You can also easily adjust the dimensions of the box by opening this in Fusion 360 and tweaking any parameters desired. For the most part this should suffice, simply include, slice, and go. I recommend printing with a brim since large models in PLA can pull off the print bed. These are very good for stickers if you wish to apply one to the top or bottom.

I have also provided an Archive folder of all previous versions of the all-in-one. These are still functional, just earlier versions.

The Embossed Lids are some alternative lids I've created using popular terms for the medication therein. These are not required but you may find amusing. Each has the text on the exterior sunk to 2mm into the 4mm lid, still plenty of distance to support the contents. The dimenions are small and should not require supports.

Contributing

I have done my best to make model files available for a variable of manufacturers and dimensions. If one is missing and you can get me the dimensions of the vial please notify me and I will get it adjusted as soon as I can. That said, pull the archive, open in Fusion 360, and use “Modify → Change Parameters” to be able to adjust for your own vial if I am moving too slowly.

Like my work? Donate here.

Added an interior tray with compartments for holding needles, syringes, a vial, bandages, and cleaning wipes.