3D Models GadgetsComputers

Tandy Remix of TapTo NFC 1541

1 reviews
Added Tandy Logo to make it look like a DOS era external floppy drive.
12
38
1
937
updated March 14, 2024

Summary

PDF
Added Tandy Logo to make it look like a DOS era external floppy drive.

Tags

caseretroretrogamingnfcnfctag

Model origin

The author remixed this model.

TapTo NFC 1541
by Ninja3DP
Original model was switched to draft or deleted

Differences of the remix compared to the original

Added Tandy logo to the top blank shell to mimic an external Tandy Floppy drive (close enough).  Bottom shell was also modified to house a complete DIY Tapto NFC reader with the shell and made a small opening in towards the front so there would be room to direct the LED wires to the side of the case.  I did not modify the DIY shell so you'll have to make a tiny hole for the wires to come out when you wire up the LEDs.  You can see where I did it on mine.  This remix is only for the top and modified bottom shell so you'll need to print the front cover from Bedroom Ninja.  If you have a different NFC reader, print Bedroom Ninja's bottom shell and adjust accordingly.

For reference: 

Red 3mm LED = Green LED on DIY board for the steady “red" light.

Green 3mm LED = Blue LED on DIY Board for the “activity” light.

License